Thermaster 216L 2x2 Solid Door Pass-Through Ventilated GN 1/1 pan Refrigerated Island Counter - GN2100TNC
Model GN2100TNCSKU GN2100TNCAvailability enquiry
Thermaster 216L 2x2 Solid Door Pass-Through Ventilated GN 1/1 pan Refrigerated Island Counter - GN2100TNC The Pass-Through ranges are double-sided pass-through refrigerated island counters, designed to sit in the middle of a kitchen rather than against a wall. Doors on both sides mean prep and plating staff working opposite each other can both reach the same stock without walking...
Thermaster 216L 2x2 Solid Door Pass-Through Ventilated GN 1/1 pan Refrigerated Island Counter - GN2100TNC
The Pass-Through ranges are double-sided pass-through refrigerated island counters, designed to sit in the middle of a kitchen rather than against a wall. Doors on both sides mean prep and plating staff working opposite each other can both reach the same stock without walking around the bench — the reason island counters exist, and the reason they cut steps out of a busy service.
Built entirely in AISI 304 stainless steel inside and out, with rounded internal edges and a ventilated refrigeration system, it is designed for hard daily use and quick cleaning between shifts.
Key Features
Gross Volume: 216L
Max Ambient Temperature: 40℃, 40%RH
Temperature Range: -2 to +8°C
HC-free refrigerant and foam
Electronic thermostat and digital LED temperature display for accurate control and easy reading
Ventilated refrigeration compartment gives a better air circulation
Auto defrosting and auto evaporation of condensation water
Magnetic gasket can be replaced without any tools
Insulation 60 mm thick
Self-closing door
Heating element concealed in doorframe to eliminate any condensation
Complete structure interior & exterior in stainless steel AISI 304 with round internal edges for ease of cleaning
Refrigerated GN central counter designed to accommodate GN 1/1 pan size (suits GN2100TNC and GN3100TNC)
Refrigerated PA central counter Design for 400x600mm shelf (suit PA2100TNC And PA3100TNC)
2 Years Parts & Labour Plus 2 Years Parts Only Warranty When Products Are Registered Within 14 Days Of Invoice
Installation and site requirements
Confirm power, gas, water, drainage, access and clearances against matched manufacturer documentation before ordering.
